www.cisco.com
Display settings
The Display settings let you adjust:
• Preferred brightness by moving the Brightness slider.
• The color balance. There are four preset color settings
(Cold, Neutral, Warm and your own (Custom)) available.
When you select Custom, you may use the Red, Green
and Blue sliders to specify your own setting.
• The DVI mode can be set to automatically detect the type
of video signal received, or forced to analog or digital. The
DVI mode is used when the unit is connected to a PC to
serve as a PC monitor.
28
Cisco TelePresence System EX90 User guide
D14724.03 User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
To Next Page
Loading...
