18 Cisco Unified Communications 500 Series Model UC 540 Quick Start Guide
S
TEP 5 Enter 192.168.10.1 in the Starting IP Address field.
This is the default IP address for the UC 540.
STEP 6 Click Start.
STEP 7 When prompted, enter the username and password for the
UC 540 and click OK.
The default username is cisco and the default password is cisco.
Passwords are case sensitive.
STEP 8 If prompted for the login information for a connected ESW switch,
enter the switch username and password. CCA will automatically
discover the device.
The switch default username is cisco and the default password
is cisco.
STEP 9 When CCA discovers both the UC 540 and ESW switch
(if installed), click OK.
Using the Telephony Setup Wizard
When CCA connects to the UC 540, the Telephony S etup Wizard
automatically launches. You can also run the Wizard by choosing
Home >Telephony Setup Wizard. The wizard guides you through the
steps needed to configure a basic telephony solution for a Cisco Smart
Business Communications System.
Before you begin:
• Gather the information listed in the Welcome window. This is important
information about what you must do and know before running the
wizard.
• If you are setting up the system for a locale other than US/English, click
View Localization Instructions and follow the instructions to download
and install the language files to your PC.
To Next Page
Loading...
Need help?
General
