Cisco UCS 5108 Blade Server Chassis
TECHNICAL SPECIFICATIONS
43
TECHNICAL SPECIFICATIONS
Physical Dimensions and Specifications
Table 22 Cisco UCS 5108 Chassis Specifications
Parameter Value
Height 10.5 in. (26.7 cm); 6 rack unit (6RU)
Width 17.5 in. (44.5 cm); fits standard 19-inch square-hole rack (or round
hole threaded or non-threaded, with optional adapter kit)
Depth 32 in. (81.2 cm)
Weight 90 lbs (40.83 kg) empty, 255 lbs (115.66 kg) fully configured
Blade server slots 8 half-width slots, 4 full-width slots, or combination of half- and
full-width slots.
Fabric Extender slots 2
Fabric Extenders Compatible with 2208XP, 2204XP, and 2104XP Fabric Extenders
Power Four 2500 W output, 200 V – 240 V, 50 to 60 Hz, single-phase,
hot-swappable, redundant power supplies, with IEC-320 C20
connections or 2500 W output -48 V DC Input
Supports non-redundant, N+1 redundant, and N+N grid redundant
configurations
Fans 8 hot-swappable fans
Each fan module contains 2 redundant fans; up to two fans can fail
in the system.
Management Managed from the Cisco UCS 6100/6200 Series Fabric Interconnects
by Cisco UCS Manager (redundant management operations when the
chassis is configured with two fabric extenders)
Backplane 1.2 TB of aggregate throughput; supports 10BASE-KR connections for
8 blades
Regulatory compliance Products comply with CE Markings per directives 2004/108/EC and
2006/108/EC
Safety ■ UL 60950-1
■ CAN/CSA-C22.2 No. 60950-1
■ EN 60950-1
■ IEC 60950-1
■ AS/NZS 60950-1
■ GB4943
To Next Page
Loading...
Need help?
General
