Cisco UCS C Series Troubleshooting Tips

Run Debug Firmware Utility (CLI)
You can run Debug Firmware Utility (CLI) to view realtime CIMC debug status:
Access to read−only shell to view realtime CIMC Debug status.
CIMC Debug Utilities
!−−− enter debug shell
rtp−6100−A#
SanDiego /cimc # connect
debug−shell
diags
host
shell
SanDiego /cimc # connect debug−shell
<CR>
SanDiego /cimc # connect debug−shell
BMC Debug Firmware Utility Shell
[ help ]#
!−−− available debug options
[ help ]# ?
__________________________________________
Debug Firmware Utility
__________________________________________
Command List
__________________________________________
alarms
cores
exit
help [COMMAND]
images
mctools
memory
messages
network

Cisco UCS C Series Specifications

General

Processor	Intel Xeon Scalable Processors
Management	Cisco Integrated Management Controller (CIMC)
Memory	DDR4
Storage	NVMe
RAID Support	Yes
Network	Multiple Gigabit Ethernet and 10 Gigabit Ethernet options
Power Supply	Redundant power supply options
Operating System Support	VMware, Microsoft Windows, Linux
Form Factor	Rack Server