Cisco UCS E Series Troubleshooting Guide

SUMMARY STEPS
1.
In the Navigation pane, click the Server tab.
2.
On the Server tab, click BIOS. The BIOS page appears.
3.
In the BIOS Properties area, the BIOS version is displayed in the Running Version field.
DETAILED STEPS
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click BIOS. The BIOS page appears.
Step 3
In the BIOS Properties area, the BIOS version is displayed in the Running Version field.
Determining the BIOS Version Installed on the E-Series Server or the NCE from the CIMC CLI
Enter the following commands:
Server # scope bios
Server /bios # show detail
BIOS:
BIOS Version: UCSES.1.5.0.1 (Build Date: 02/14/2013)
Boot Order: CDROM:Virtual-CD,HDD:RAID,EFI
FW Update/Recovery Status: None, OK
Active BIOS: main
Determining the CIMC Version Installed on the E-Series Server or the NCE
You can determine the CIM version installed on the E-Series Server or the NCE from the CIMC GUI or from
the CIMC CLI.
Determining the CIMC Version Installed on the E-Series Server or the NCE from the CIMC GUI
To determine the CIMC version of the E-Series Server, do the following from the CIMC GUI.
SUMMARY STEPS
1.
In the Navigation pane, click the Admin tab.
2.
On the Admin tab, click Firmware Management. The Firmware Management page appears.
3.
In the CIMC Firmware area, the CIMC version is displayed in the Running Version field.
DETAILED STEPS
Step 1
In the Navigation pane, click the Admin tab.
Step 2
On the Admin tab, click Firmware Management. The Firmware Management page appears.
Step 3
In the CIMC Firmware area, the CIMC version is displayed in the Running Version field.
Determining the CIMC Version Installed on the E-Series Server or the NCE from the CIMC CLI
Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine
10
Overview
Determining Version Information

Cisco UCS E Series Specifications

General

Brand	Cisco
Model	UCS E Series
Category	Server
Language	English