Cisco VG224 - Analog Phone Gateway - Hardware Installation Guide Manual

75 pages

To Next Page

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 526-4100

Cisco VG224 Voice Gateway

Hardware Installation Guide

Text Part Number: OL-5006-04

Main Page

Default Chapter3
- Table of Contents3
- Related Documentation3
- Safety3
Rack4
Preface7
- Audience7
- Organization7
- Conventions8
- Safety Warnings9
  - Warning Definition9
  - Related Documentation14
- Obtaining Documentation15
  - Cisco.com15
  - Ordering Documentation15
- Documentation Feedback15
- Obtaining Technical Assistance16
- Obtaining Additional Publications and Information17
Chapter 1 Overview of the Cisco VG224 Voice Gateway19
- Overview19
  - Product Serial Number Location for the Cisco VG224 Voice Gateway20
  - Configuration Options22
- Cisco VG224 Voice Gateway Deployment22
- Interfaces and Service Capabilities22
- Physical Description and Leds23
- Chassis Grounding24
- Port Numbering Conventions24
- Specifications24
- Software Elements25
  - Configuration Connections25
  - Configuration Methods25
    - Automated Configuration25
    - Manual Configuration25
Chapter 2 Planning Your Installation27
- Location and Mounting Requirements27
- Distance Limitations for Interface Cables31
  - Fast Ethernet Maximum Distance31
  - FXS Analog Voice Port Maximum Distance31
- Interference Considerations31
- C H a P T E R 3 Installing the Cisco VG224 Voice Gateway34
CHAPTER 3 Installing the Cisco VG224 Voice Gateway34
Safety Recommendations34
- Maintaining Safety with Electricity34
- General Safety Practices34
- Safety Tips34
- Preventing Electrostatic Discharge Damage35
Site Log35
Keeping Track-Checklist36
- Installation Checklist36
Mounting Tools and Equipment37
Unpacking and Inspection37
Rack-Mounting the Chassis38
- Rack Mounting the Chassis38
- Mounting Screws38
- Attaching the Brackets39
- Telco 19-Inch Rack Installation-Rear Panel Forward39
- Installing the Cisco VG224 Voice Gateway in a Rack40
Wall-Mounting the Chassis41
Bench-Top Installation43
Installing the Ground Connection43
Connecting Cables46
- LAN and Power Cables47
- Connecting the Input Power48
- Ports, Connectors, and Pinouts52
- Remote Terminal Connections (if Applicable)52
- Connecting Backup Power53
  - Connecting a Backup Battery to a DC-Powered Cisco VG22453
  - Connecting a UPS to an AC-Powered Cisco VG22455
Chapter 4 Powering on the Cisco VG224 Voice Gateway57
- Checklist for Power-On57
- Power-On Procedure57
- Initial Configuration Procedures58
- Troubleshooting60
- Troubleshooting61
Appendix63
- Alternative Terminal and Modem Connections63
- Auxiliary Port to Modem-Cable Pinouts (RJ-45 to DB-25)63
- Console Port to ASCII Terminal-Cable Pinouts63
- Console Port to PC-Cable Pinouts (RJ-45 to DB-9)63
- Console and Auxiliary Port Cables and Pinouts63
Cable Specifications and Information64
- A P P E N D I X a Cable Specifications and Information64
- Console and Auxiliary Port Cables and Pinouts64
- Alternative Connections to Terminal and Modem67
- Fast Ethernet Port Pinouts (RJ-45)68
  - RJ-45 Connector Wiring68
- Analog Voice Multiport Pinouts (RJ-21X/CA21A)69
I N D E X73

Cisco VG224 - Analog Phone Gateway - Hardware Installation Guide Manual

Table of Contents

Other manuals for Cisco VG224 - Analog Phone Gateway

Related product manuals