Cisco VG400 series - Configuration Methods; System configuration dialog; Configuration mode: Cisco IOS software CLI; Setup command facility: Remote configuration through a LAN

CHAPTER 5
Configuration Methods
After Cisco 400 Voice Gateway is operational, use the procedures in Cisco 400 Voice Gateway Software
Configuration Guide to configure the specific services and functions or to make changes to an existing
configuration.
There are multiple methods for configuring Cisco 400 Voice Gateways:
• System configuration dialog
• Configuration mode: Cisco IOS software CLI
• Setup command facility: Remote configuration through a LAN
• SNMP-based application: CiscoView or HP OpenView
• HTTP-based configuration server: Provides access to the CLI from a web browser
Cisco VG400 Voice Gateway Hardware Installation Guide
31