Cisco VG400 series - Page 7

DescriptionColorRepresentsLED
System operates normallySolid Green
System StatusSTAT
BIOS/RUMMON bootingBlinking Amber
BIOS/ROMMON has
completed booting, and
system is at the
ROMMON prompt or the
booting platform software
Amber
Compact flash/eUSB flash
is present and is currently
being accessed.
Note Do not remove the
flash device while the
system is powered on.
Blinking Green
SystemFlash statusFLASH
All the temperature
sensors in the system are
within the acceptable
range
Solid GreenTemperature StatusTEMP
One or more temperature
sensors in the system are
outside the acceptable
range
Amber
Temperature is not being
monitored
Off
All the fans are operatingGreen
Fan statusFAN
One of the fans has
stopped working
Amber
Two or more fans have
stopped working, or the
fan tray has been removed
Blinking Amber
Fans are not monitoredOff
Slot, Bay, and Ports
The FXO port is used to connect to PBX or key systems, or to provide off-premises connections to the PSTN.
It supports battery reversal detection and caller ID. The FXO port is also used to connect to analog Centralized
Automatic Message Accounting (CAMA) trunks to provide dedicated E-911 service (only in North America).
The FXS port is used to connect analog phones, modems, fax machines, and speaker phones to an enterprise
IP voice system, to use them as extensions to your Cisco or third-party IP call-control system. Having these
Cisco VG400 Voice Gateway Hardware Installation Guide
5
Introduction to Cisco VG400 Voice Gateway
Slot, Bay, and Ports