Contents
xi
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
78-15908-01
Maintaining VMPS 12-9
Configuring Static Ports 12-10
Troubleshooting VMPS and Dynamic Port VLAN Membership 12-10
Troubleshooting VMPS 12-11
Troubleshooting Dynamic Ports 12-11
VMPS Example 12-11
Dynamic Port VLAN Membership with Auxiliary VLANs 12-14
Configuration Guidelines 12-14
Configuring Dynamic Port VLAN Membership with Auxiliary VLANs 12-14
CHAPTER
13 Configuring GVRP 13-1
Understanding How GVRP Works 13-1
GVRP Hardware and Software Requirements 13-1
Default GVRP Configuration 13-2
GVRP Configuration Guidelines 13-2
Configuring GVRP on the Switch 13-2
Enabling GVRP Globally 13-2
Enabling GVRP on Individual 802.1Q Trunk Ports 13-3
Enabling GVRP Dynamic VLAN Creation 13-4
Configuring GVRP Registration 13-4
Sending GVRP VLAN Declarations from Blocking Ports 13-6
Setting the GARP Timers 13-6
Displaying GVRP Statistics 13-7
Clearing GVRP Statistics 13-8
Disabling GVRP on Individual 802.1Q Trunk Ports 13-8
Disabling GVRP Globally 13-8
CHAPTER
14 Configuring QoS 14-1
Understanding How QoS Works 14-1
QoS Overview 14-1
Understanding QoS Terminology 14-2
Understanding Classification and Marking at the Ingress Port 14-3
Understanding Scheduling 14-3
Software Requirements 14-4
QoS Default Configuration 14-4
Configuring QoS on the Switch 14-4
Enabling QoS Globally 14-5
Configuring the Default CoS Value for the Switch 14-5
To Next Page
Loading...
