Contents
xvi
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2948G-GE-TX, and Catalyst 2980G Switches Software Configuration Guide—Release 8.2GLX
78-15908-01
Configuring SNMPv1 and SNMPv2c from the CLI 24-9
SNMPv1 and SNMPv2c Enhancements in Software Release 7.5(1) 24-10
Configuring SNMPv3 from the CLI 24-14
Using CiscoWorks2000 24-17
CHAPTER
25 Configuring RMON 25-1
Understanding How RMON Works 25-1
Enabling RMON 25-2
Viewing RMON Data 25-2
Supported RMON and RMON2 MIB Objects 25-3
CHAPTER
26 Configuring SPAN and RSPAN 26-1
Understanding How SPAN and RSPAN Work 26-1
SPAN Session 26-1
Destination Port 26-2
Source Port 26-2
Reflector Port 26-3
Ingress SPAN 26-3
Egress SPAN 26-3
VSPAN 26-3
Trunk VLAN Filtering 26-4
SPAN Traffic 26-4
SPAN and RSPAN Session Limits 26-4
Configuring SPAN 26-4
Understanding How SPAN Works 26-4
SPAN Configuration Guidelines 26-5
Configuring SPAN 26-6
Configuring RSPAN 26-8
RSPAN Software and Hardware Requirements 26-8
Understanding How RSPAN Works 26-8
RSPAN Configuration Guidelines 26-9
Configuring RSPAN 26-10
RSPAN Configuration Examples 26-14
CHAPTER
27 Administering the Switch 27-1
Setting the System Name and System Prompt 27-1
Configuring the System Name and Prompt 27-2
Setting the System Contact and Location 27-3
To Next Page
Loading...
