Citizen C900 - 7 Using the Time; Calendar Mode

7. Using the Time / Calendar Mode
This mode is used to display the current time and date.
• The watch alternates between displaying “hours , minutes and seconds” and
“hours, minutes, date and day” each time button (A) is pressed during the
normal display.
• Temperature and barometric pressure are displayed for 3 minutes when but-
ton (A) is pressed for at least 2 seconds during the normal display.
29
* The surface mode only displays 24 hours of elapsed time after completion
of a continuous dive of at least 3 minutes duration. In other cases, press-
ing button (M) when the watch is in the altitude memo mode switches the
watch to the time/calendar mode.
* When none of the buttons are pressed for at least 3 minutes when the
watch is in the alarm mode, reset state of the chronograph mode, log
memo mode, dive alarm mode or altitude memo mode, the watch auto-
matically returns to the time/calendar mode.
* The watch cannot be changed to the water depth measurement mode or
altitude measurement mode when the low battery warning function has
been activated.
28
Seconds
Hours /
minutes
Date / day
Barometric
pressure
Temperature
TME
TME
TME
(A)
(B)
(M)
(A)
((A))
(A)