87
88
PIPETTE CAL. RESULTS
Count : 5 Cnt
Temp. : 15.0 °C
Pressure : 800 hPa
Results : Vmin
1 10016.45 uL
2 10016.45 uL
3 10016.35 uL
4 10016.35 uL
5 10016.35 uL
Vmin = 10.00 uL
Va = 10016.39 uL
Es = 10006.39 uL
Es% = 100063.88 %
Sr = 0.05 uL
CV = 0.00 %
------------------------
Results : V1/2
1 15023.12 uL
2 15023.12 uL
3 15024.42 uL
4 15024.42 uL
5 15024.12 uL
V1/2 = 11.00 uL
Va = 15023.84 uL
Es = 15012.84 uL
Es% = 136480.37 %
Sr = 0.67 uL
CV = 0.00 %
------------------------
Results : Vmax
1 20032.40 uL
2 20032.30 uL
3 20032.30 uL
4 20032.20 uL
5 20032.20 uL
Vmax = 12.00 uL
Va = 20032.28 uL
Es = 20020.28 uL
Es% = 166835.63 %
Sr = 0.08 uL
CV = 0.00 %
------------------------
Legend
Va : Mean Value
Es : Systematic Error
Es% : Es expressed as %
of nominal value
Sr : Standard Deviation
CV : Coefficient of
Variation
------------------------
11-Apr-11 00:18
Citizen
Model 00Ct603
Ser.no. 1012652
Ver.no. r0.1.5.8
ID 1234567
------------------------
PIPETTE CAL. RESULTS
Count : 5 Cnt
Temp. : 15.0 °C
Pressure : 800 hPa
Results : Vmin
1 10016.45 uL
2 10016.15 uL
3 10015.75 uL
4 10015.75 uL
5 10015.65 uL
Vmin = 10.00 uL
Va = 10015.95 uL
Es = 10005.95 uL
Es% = 100059.47 %
Sr = 0.34 uL
CV = 0.00 %
------------------------
Results : V1/2
1 15023.82 uL
2 15023.62 uL
3 15023.62 uL
4 15023.62 uL
5 15023.72 uL
V1/2 = 11.00 uL
Va = 15023.68 uL
Es = 15012.68 uL
Es% = 136478.92 %
Sr = 0.09 uL
CV = 0.00 %
------------------------
Results : Vmax
1 20031.89 uL
2 20031.89 uL
3 20031.89 uL
4 20031.59 uL
5 20031.59 uL
Vmax = 12.00 uL
Va = 20031.77 uL
Es = 20019.77 uL
Es% = 166831.45 %
Sr = 0.16 uL
CV = 0.00 %
------------------------
Legend
Va : Mean Value
Es : Systematic Error
Es% : Es expressed as %
of nominal value
Sr : Standard Deviation
CV : Coefficient of
Variation
------------------------
11-Apr-11 00:18
Name:
................
------------------------
WITH GLP OFF
WITH GLP ON
If the balance is connected externally to PC or Printer through RS 232 C then, whenever user enter into the menu of Pipette Calibration &
make changes in it, automatically printout is generated on the Peripheral attached.
The following are the parameters that are Printed along with the readings :
If the balance is connected externally to PC or Printer through RS 232 C then, whenever user enter into the menu of Pipette Calibration &
make changes in it, automatically printout is generated on the Peripheral attached.
The following are the parameters that are Printed along with the readings :
To Next Page
Loading...
