Citizen CL-S400DT - Page 38

38
Chapter 2 Printer Operation
Top Menu Sub Menu Default Menu Remarks
Serial Monitor – – Displays the state of the serial interface.
Auto Calibration
[Auto Cal]
See Through See Through
Reect
Executes the calibration of the sensor.
Sensor Monitor See Through See Through
Reect
Displays the level of the sensor.
Global
conguration
[Global Cong]
– Cong Set 1 Cong Set 1
Cong Set 2
Cong Set 3
Sets the Cong Set.
Note: To restore factory default settings, turn on printer power while pushing the MENU and PAUSE keys simultaneously, then press
the FEED key and the STOP key sequentially.
Mode Settings
[Datamax® Emulation]