Citizen CLP 1001

E
N
G
L
I
S
H
3.4 Media Thickness Adjustments
CAUTION
Ensure the print head adjustments are made correctly
according to the type of media (thickness & width).
Incorrect adjustments can cause failure of the print
head.
The offset adjustment screw allows you to adjust the printer depending on the
thickness of media being used.
The relationship between the offset adjustment screw and the print head
heating element is shown below:
Offset verification window
Offset adjustment screw (M3)
a) Print head position for labels (regular media)
Offset verification window
b) Print head position for tags or card (thicker media)
Heating element
Heating element
Offset adjustment
screw
Offset verification window
a
b
Offset adjustment
screw