Appendixes
78
2. Tear-off when printing
• If set, the tear-off feature will start if no data is transmitted from the computer after printing. If data is
transmitted continuously from the computer, the tear-off function will be suppressed. Tear-off is only
performed for the final label of each batch processing. (The tear-off is not performed until the
specified number of print sheets is completed.)
• Media is fed to the tear position
• When manual tearing is needed, tear the label at this time.
• Performs next label printing.
When next print data is transmitted form the computer, the printer feeds back media to the previous
print completed position and resumes printing.
2 Specifications
To Next Page
Loading...
