29
——
LED Functions
The tables below explain how to interpret LED indications.
12 312 3
1. Wired LAN transmission speed
Transmission speed LED (green)
100 Mbps Lit
10 Mbps/Not connected Unlit
2. Wired LAN connection/transmission status
Connection status LED (yellow)
Connected Lit
Not connected Unlit
Data transmission in
progress
Flashing
3. Wired/Wireless LAN status
Connection status LED (green) LED (red) Description
No printer connection Unlit — Board is not connected with a printer.
Printer
connec-
tion
No network con-
nection
Lit Unlit Board is connected with a printer.
Connected by wired
LAN
Lit Flashing
(1-second
cycle)
Getting an IP address from the DHCP
server over wired LAN.
Wired LAN operation Lit Lit Network operation being performed over
wired LAN.
Connected by wire-
less LAN *
Flashing
(2-second
cycle)
Flashing
(1-second
cycle)
Connecting to an access point or getting
an IP address from the DHCP server over
wireless LAN.
Wireless LAN opera-
tion *
Flashing
(2-second
cycle)
Lit Network operation being performed over
wireless LAN.
Resource error Alternate ashing
(1-second cycle)
Board is unable to operate normally.
System error Alternate ashing
(0.2-second cycle)
Board is unable to operate normally.
*: Only when using wireless LAN
To Next Page
Loading...
