— 13 —
3.3 Installing the Printer
The printer can be installed horizontally or on the wall.
At the time of shipment, the printer is set for horizontal installation. To install
the printer on the wall, the following adjustments are required.
Hooks for wall mounting
n3
n5.6
50.5
170
106
3.5 2.4
56
Horizontal position Wall mounting
CAUTION!
● No screw for wall mounting is provided. Check the structure and strength of the wall
(plaster board or stronger one) and prepare two appropriate screws (round-head wood
screws of 3.1φ, 16 mm or more). And fix the printer by tightening the screws in
accordance with the specified dimensions.
To Next Page
Loading...
