Citizen CT-S310II User Manual

—39—
Use the paper shown in the following table or paper of the same quality.
(Unit: mm)
5.2 Printing Paper
Paper type Product name
Recommended
thermal roll
paper
TF50KS-E2D, TF50KS-E or TF60KS-E from Nippon Paper
PD150R or PD160R from Ohji Paper
PA220AG, HP220A, HP220AB-1, F230AA or P220AB from Mitsubishi Paper
CAUTION
Use thermal paper that is wound as follows:
 Not creased and fits tight to the core.
 Not folded.
 Not glued to the core.
 Rolled with the printable side out.
Maximum print area 72
Paper width 80
+0
-1
Printable side
φ83 or less
Paper width 58
+0
-1
Paper
thickness (μm)
65-75 75-85
Core inner
diameter d
(mm)
φ12 φ25.4
Core outer
diameter D
(mm)
φ18 φ32
Print width 48
(384 dots)

Citizen CT-S310II Specifications

General

Character size	1.5 x 3 mm
Print technology	Thermal
Dimensions (WxDxH)	140 x 195 x 132 mm
Certification	UL, C-UL, FCC, TÜV, CE, CCC
Built-in barcodes	Code 128 (A/B/C), Code 39, EAN13, EAN8, ITF-14, PDF417, QR Code, UPC-A, UPC-E
Autocutter durability	2 million cuts
Product color	Black
Maximum roll diameter	83 mm
Supported paper width	80, 58 mm
Printing media thickness	65 - 75 µm
USB port	Yes
Standard interfaces	USB 2.0, Serial
Serial ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Ethernet LAN	No
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (printing)	32 W
Harmonized System (HS) code	84433210