—54—
Use the paper shown in the following table or paper of the same quality.
(Unit: mm)
5.2 Printing Paper
Paper type Product name
Recommended
thermal roll paper
Nippon Paper TP50KR-2Y, TP50KJ-R, TL69KS-LH, TF50KS-E2D
Oji Paper PD150R, PD160R, PD160R-63
Mitsubishi Paper Mills HP220AB-1, P220AB
Koehler KT48-FA
Use paper that is wound as follows:
Not creased and fits tight to the core.
Not folded.
Not glued to the core.
Rolled with the printable side out.
Printable side
φ83 or less
Paper width 58
Paper
thickness (μm)
53-85
Core inner
diameter d
(mm)
φ12
Core outer
diameter D
(mm)
φ18
Maximum print area 48
(Initial setting)
To Next Page
Loading...
