Citizen E610 - Switching Watch Modes; Procedure for Switching Modes

136
6. Switching the Mode
• This watch is equipped with six modes consisting of a time (displayed at three locations),
chronograph, local time, reference position, alarm and calendar mode.
• The same time is displayed at all three locations in the time (TME) mode.
<Procedure for Switching the Mode>
When the crown is pulled out to Position 1 (mode switching position),
the second hand advances (clockwise rotation) and
stops at the 30 second position.
If the second hand does not stop at the 30 seconds
position, refer to the section entitled, “Checking and
Correcting the Reference Position” and correct the
reference position.
(1) Turn the crown and align the mode hand at each
mode.
• The mode hand can be aligned by turning the
crown to the right or left. Each mode can be
selected by moving the mode hand.
Mode switching
position
Mode correction
position
Second hand
Mode hand
(0)
(1) (2)