166
A. Power Save Function
<Power Save>
When the solar cell is continuously not exposed to light for 30 minutes or more, the
second hand stops at the 12:00 position and the watch enters the Power Save mode (to
reduce power consumption).
• Other hands continue to move normally.
<Canceling Power Save>
The power save function is canceled automatically when the solar cell is exposed to light.
• When the power save function is canceled, the second hand advances to return to the
current time and begins one-second interval movement.
• Two-second interval movement begins if the watch is insufficiently charged. When
this happens, sufficiently charge the watch so that it returns to one-second interval
movement.
[Note]
Although the watch will continue to be accurate to within the time accuracy
range in the power save mode, when the power save function is canceled, be sure
to perform on demand reception before using.
To Next Page
Loading...
