139
• The function hand changes to chronograph minutes or chronograph 1 ⁄ 20 seconds.
• It moves at one minute intervals to measure chronograph minutes.
• When button (A) is pressed to start the chronograph, it displays time in 1 ⁄ 20
chronograph seconds for as long as it is pressed.
• The hour and minute hands may display the mode prior to switching the mode
when the watch has been switched from another mode to the chronograph mode.
<Chronograph Timing>
Pull the crown out to Position 1 and turn to align the
mode hand at [CHR] (chronograph), and then push
it in to the normal position.
(1) The chronograph is started and stopped and a
confirmatory tone sounds each time button (B) is
pressed.
Chronograph 1 ⁄ 20
second display
Function hand
(chronograph minutes ⁄
chronograph 1 ⁄ 20 seconds)
Chronograph second hand
To Next Page
Loading...
