Citizen E610 - Page 56

157
(2) Return the crown to the normal position.
• The second hand moves to the reference position (0:00) and stops.
If the reference positions of each hand are properly displayed as described above,
pull the crown out to Position 1, turn it and return the watch to the mode in which
is was previously being used.
<Reference Position of Each Hand>
• 24 hour hand: 24 hours 0 minutes
• Hour hand, minute hand: 0 hours 0 minutes
• Second hand: 0 seconds
• Function hand: MON
• Date: Between 31st and 1st
* If the display of the watch is not as
shown above, perform Reference Position
Correction described in the following section.
Mode
switching
position
Reference
position
correction
position
Button (B)
[Correct Reference Position
of Each Hand]
Button (A)
(0) (1) (2)