Citizen Eco-Drive E660 - Using the Chronograph

38
Using the chronograph
The chronograph on this watch can measure up to 60 minutes in 1 second
increments.
1
Change the mode to [
CHR
] (page 14 ) and push the
crown in to position
0
.
0 minute 0 second is indicated.
2
Start measurement.
• See the next page for the method of measurement.
• Pulling out the crown will stop and reset the chronograph.
3
Change the mode to [
TME
] and push the crown in to
position
0
to finish the procedure.
B
0 1 2
AA
B