Citizen Eco-Drive E660 - Resetting the Watch - All Reset

68
Troubleshooting
Resetting the watch — All Reset
When the watch does not work properly, you can reset all the settings. If the power
reserve is insufficient, charge the watch first.
Be sure to perform the following operations after All Reset.
1
Correct the reference positions.
After All Reset, the watch is in the reference position adjustment
mode.
Refer to step 3 and after on page
61
.
2
Set the world time. (page
24
)
3
Adjust the time and calendar.
Adjust the time and calendar manually (page
56
) or by receiving
time signals (page
29
).