Citizen Eco-Drive E660 - Page 63

61
Troubleshooting
1
Change the mode to [
CHR
] (page 14 ) and pull the
crown out to position
2
.
The hands and indication move to the current reference
positions stored in memory and stop.
2
Check the reference positions of them referring to the
illustration of the previous pages.
Correct
Push the crown in to position
0
to finish the
procedure. Set the mode to [
TME
] after that.
Wrong
Proceed to step 3 and correct the reference
position.
3
Press and release the lower right button
A
.
The function hands move slightly.
B
0 1 2
AA
2
Continued on the next page
➡