Citizen H162 - Receiving the Time Signal to Set the Time and Calendar; Before Receiving the Signal (Reference Position Check)

20
Receiving the time signal to set the time and calendar
7 Before receiving the signal
(Reference position check)
Ensure the reference position is correct or not
before receiving the signal.
The correct reference position for the time and
calendar is “SUN (Sunday),” “12:00:00,” “1 (1st
day).” If the reference position is incorrect, the
watch will not display the time and calendar
correctly even after receiving the signal.
• The reference position may become incorrect
if the watch is exposed to strong magnetism,
static or shock. Adjust the reference position
(see page 60) if the time and calendar are not
displayed correctly after receiving the signal.
Correct reference position
• Day of the week hand points
to “SUN.”
• Hour, minute and second
hands point to “12:00.”
• Date window displays “1.”