28
On demand reception
1. Push the crown in to position 0.
2. Press and hold the lower right
button (A) for two or more
seconds.
The second hand indicates the last
reception result (NO, H, M or L), then
points to RX.
3. Place the watch according to
“Placement for better reception.”
(See page 24)
• Do not move the watch until all hands
start to move again.
• See page 30 for how the watch hands
moves when receiving the time signal.
Receiving the time signal to set the time and calendar
A
Second Hand
Reception standby indication (RX)
Crown
To Next Page
Loading...
