49
You cannot use the time signal reception function when the dive mode is
activated.
• Reception of the signal (see page 26)
• Checking the results of the reception (see page 32)
To deactivate the dive mode
Set the crown to position 0, then press and hold the upper right button (B) for
seven or more seconds.
The dive mode hand moves to indicate the current day of the week.
Caution
• You cannot activate/deactivate the dive mode while the insufficient charge
warning function (see page 51) is active. Use the watch only after charging it
fully.
• You cannot activate/deactivate the dive mode while the indications for the
date and day are changing. Activate/deactivate it after they have changed.
• Make sure to deactivate the dive mode after diving.
To Next Page
Loading...
