1918
Power saving function
Caution
Charge the battery if the second hand is moving once every 2 seconds after the
power saving function is canceled. (→ page 14)
Condition when the function is activated Movement of the watch To cancel the function
When the dial is not exposed to light for
more than 30 minutes—Power saving
function 1
The digital section is turned
off.
Expose the dial to light or press any button.
When the dial is not exposed to light
for more than 7 days—Power saving
function 2
The digital section is turned
off and all hands stop at the
reference position.
Expose the dial to light.
• The hour, minute, second, and 24-hour hands
start to move and indicate the current time.
• If the indicated time is not correct, adjust the
time and calendar. (→ page 20)
To Next Page
Loading...
