Citizen u700 - Checking Reference Position Accuracy

4140
Checking and correcting the current reference position
■ Checking the reference position
Check whether the reference position is correct or not.
24
12
18
.01
50
10
20
30
0
40
.02
.03
.04
.05
.06
.07
.08
.09
.00
6
0
1
2
3
4
5
6
7
8
9
1/1000Sec.
60
30
25
20
15
10
05
55
50
45
40
35
01
“CHR”
Button M
Button A
Button B
Crown
1/10 chronograph second hand
1/100 chronograph second hand
Chronograph
second hand
Check and adjust the reference position
also in the following cases:
• The correct time is not displayed on
the analog section even after the time
setting.
• Each chronograph hand does not point
to “0/.00”, “0 or 60” even after resetting
the measurement time.
1.
Press button
M
to change the mode to
Chronograph. (“CHR”)