235
INJECTION
CHECKS : LOW PRESSURE FUEL SUPPLY CIRCUIT
Engines : 8HX - 8HW
TOOLS
[1] Ø 10 mm low pressure connector : 4215-T.
[2] Pressure gauge for testing boost pressure : 4073-T.A Tool kit 4073-T
IMPERATIVE : Respect the safety and cleanliness specific to high pressure diesel
injection engines.
Link tools [1] and [2] in series between the fuel high pressure pump and the fuel filter.
ESSENTIAL : Check that the tool [2] is clean.
Check the negative pressure according to the table below:
Vacuum Observations
10 ±5 cmHg Engine driven by the starter motor
20 ±5 cmHg
60 ±5 cmHg
Engine running under full load
Supply circuit obstructed (full tank
strainer, piping, fuel filter).
B1BP2NWC
C3
To Next Page
Loading...
Need help?
General
