273
CLUTCH
GEARBOX
DRIVESHAFTS
CLUTCH : CHECKS AND ADJUSTMENTS
B2BP03QD
For the adjusting device to operate correctly, it
is necessary that :
The pedal is at rest (against its upper stop)
The locking sleeve (1) is slightly compressed,
the rollers (2) are free, the outer cable (3) length
may vary.
Engines : RFN - RFS - WJY - RHY - RHZ
As soon as the pedal is applied, the attaching
end-piece (4) leaves the sleeve (1) which
moves back. The rollers, pushed by spring (5)
jam the system. The cable behaves like a
conventional cable.
The pedal returns to rest on its upper stop.
Attaching end-piece (4) pushes sleeve (1)
which frees the rollers. The outer cable (3),
kept extended by the spring (6) becomes :
-Shorter if the clutch disc is worn.
-Longer if the outer cable has been
compressed.
Operation Clutch disengagement phase Engagement / adjustment phase
NOTE : The pedal gear has a non-adjustable assisting device.
XSARA - XSARA PICASSO
To Next Page
Loading...
Need help?
General
