10°
P.C.D. 181
P.
C.D. 255
Rotating section
(Including hollow section)
Φ280±3
(12.5)
Φ270
Φ160h7
Φ220h7
36.5
12.5 120
4-M10 depth 20 (straight)
6-M8 depth 16 (straight)
For mounting dial plate
P.
C.D. 255
Rotating section
(Including hollow section)
Φ280±3
(12.5)
Φ270
Φ160h7
Φ220h7
36.5
Lead wire
300 from outlet
12.5
120
3-M8 (straight)
For electromagnetic brake manual release
4-M10 depth 20 (straight)
P.
C.D. 260
Φ118
Φ58
158
Electromagnetic brake
(Protection element attached)
29
81.5
6-M8 depth 16 (straight)
For mounting dial plate
240
280
240
280
P.C.D.100
Φ8H7 depth 10 (option)
Φ85
C15
4-Φ12
Mounting base (option)
145
P.
C.D.260
Φ10H7 depth 12 (option)
Not available if the optional base is installed
3-M8 depth 16 (straight)
optional electromagnetic brake
For mounting
45°
88
15
P.
C.D.190
79
79
4-M8 depth 16 (straight)
For installing optional electromagnetic brake
41
41
45°
10°
163.5 (11)
0.06
A
127.5
A
B
130
0.06
B
Cable bending range
(Downward bending
range is 125)
145
(Note): Fix the end of the cable
sheath when bending repeatedly.
27.3 26.5
27.3 25.6
Note 1) The origin of the actuator may differ from the dimensions shown above.
Origin can be configured randomly using the origin offset function.
To Next Page
Loading...
