CKD AX9000TS-U6 - Page 42

7
．
EtherNet/IP Connection Procedure
39
10
Enter EIP002_IN in the Name
Field.
Click Regist.
11
The Edit Tag Set Dialog Box is
displayed again. Click Close.
12
Check that the following tag
set information is displayed on
the In - Consume Tab Page of
the Edit Device Parameters
Dialog Box.
Name: EIP002_IN
Size: 32 Byte
13
Click the Out - Produce Tab in
the Edit Device Parameters
Dialog Box.
Click Edit Tags.
*Follow steps 13 to 19 to
create and register an output
tag set of Controller (Node 1).