CKD AX9000TS-U6 - Device Configuration

5
．
Applicable Devices and Device Configuration
6
5.2. Device Configuration
The hardware components to reproduce the connection procedures in this guide are as
follows:
Manufacturer
Name
Model
Version
OMRON
NX series CPU Unit
(Built-in EtherNet/IP ports)
NX102-1200
Ver.1.31
–
Power supply (24 VDC for the Controller)
–
OMRON
Switching hub
W4S1-05C
Ver.1.0
–
Switching hub power supply (24 VDC)
－
OMRON
Sysmac Studio
SYSMAC-SE2□□□
Ver.1.24
OMRON
Network Configurator
(provided in Sysmac
Studio package)
Ver.3.65
–
Personal computer (OS: Windows 10)
–
–
LAN cable (STP (shielded, twisted-pair)
cable of Ethernet category 5 or higher)
–
CKD ABSODEX Driver AX9000TS-U6
Ver.10.01
CKD
RS-232C cable
AX-RS232C-9P
CKD Actuator AX4009T
CKD
AXTools
–
Ver.2.22
CKD EDS file AX9000TS-U6.eds Ver.1.4
– External power supply
(24 VDC for the ABSODEX Driver)
–
Precautions for Correct Use
Prepare beforehand the EDS file specified above.
To obtain the EDS file, contact CKD Corporation. Please note that you need the EDS file
relevant to your device. If you use the other model of the ABSODEX Driver (not the one
specified above), contact CKD Corporation and obtain the relevant EDS file.
Precautions for Correct Use
Update Sysmac Studio and Network Configurator to the versions specified above or to higher
versions. If you use a version higher than the one specified, the procedures and related
screenshots described in Section 7. and the subsequent sections may not be applicable.
In that case, use the equivalent procedures described in this guide by referring to the Sysmac
Studio Version 1 Operation Manual (Cat. No. W504) and Network Configurator Online Help.
NX102-1200
(Built-in EtherNet/IP ports)
W4S1-05C
AX9000TS-U6
Personal computer
(Sysmac Studio, Network
Configurator and AXTools
installed,
OS: Windows 10)
LAN cable
Power
supply
LAN cable
AX4009T
External
power supply
AX-RS232C-9P
LAN cable
Switching hub power supply