CKD AX9000TS-U6 - Initialization Method; Initializing a Controller; Initializing a CKD ABSODEX Driver

8
．
Initialization Method
52
8. Initialization Method
The setting procedures in this guide are based on the factory default settings.
Some settings may not be applicable unless you use the devices with the factory default
settings.
8.1. Initializing a Controller
To initialize a Controller, clear all memory of a CPU Unit.
Change the operating mode of Controller to PROGRAM mode and select Clear All Memory
from the Controller Menu in Sysmac Studio. The Clear All Memory Dialog Box is displayed.
Check the contents and click OK.
8.2. Initializing a CKD ABSODEX Driver
For information on how to initialize a CKD ABSODEX Driver, refer to 3-2-1-4 ABSODEX
initialization of the INSTRUCTION MANUAL ABSODEX AX Tools for Windows
®
Common for
TS-Type, TH-Type, MU-Type and XS-Type Drivers (SMF-2005-A).