4
Overview
4. Overview
This guide describes procedures for connecting a CKD ABSODEX Driver AX9000TS/TH-U6
(hereinafter referred to as the "ABSODEX Driver") to an OMRON NJ/NX-series Machine
Automation Controller (hereinafter referred to as the "Controller") via EtherNet/IP and for
checking the communication status.
Refer to Section 6. EtherNet/IP Settings and Section 7. EtherNet/IP Connection Procedure to
understand setting methods and key points to operate EtherNet/IP tag data links.
To Next Page
Loading...