CELTIS – 10.2007 –
GB
A.15
Warning:
The power take-off must not be used at
1 000
rpm unless the implement is
designed to run at this speed (see the
user's manual).
781msn12 781msn27
Warning:
To prevent accidents, disconnect
hydraulic hoses (of the grab hook) from
the tractor distributors immediately after
locking on the implement.
781msn13 781msn36
Warning:
Keep clear of the working zone of the
linkage and the power take-off when
using external controls.
781msn14 781msn29
Do not place the starter terminals in
contact with a tool that conducts
electricity (danger of sparks).
781msn17 781msn31
Cautions Pictogram Location
WARNING
1000 REV/MIN P.T.O.
MUST NOT BE USED UNLESS
IMPLEMENT IS DESIGNED
TO BE AT THIS SPEED
(SEE OPERATOR HANDBOOK)
WARNING
TO PREVENT ACCIDENTS,
DISCONNECT HYDRAULIC RELEASE
HOSE PIPE (ON PICKUP HITCH)
FROM TRACTOR’S HYRAULIC
SYSTEM, IMMEDIATELY AFTER
LATCHING THE IMPLEMENT.
WARNING
KEEP CLEAR OF LINKAGE
WHEN OPERATING EXTERNAL CONTROL
To Next Page
Loading...
Need help?
General