CELTIS – 10.2007 –
GB
B.7
DIGITAL DISPLAYS
The unit on the instrument panel is equipped with
2
digital
displays
(D)
and
(E)
which enable accurate readings of the
following information.
DIGITAL DISPLAY
D
When the key is turned, display
D
comes on and indicates the
theoretical speed in km/h or mph.
DIGITAL DISPLAY
E
When the key is turned, display
E
comes on and shows the total
number of hours run.
By pressing button
(1)
repeatedly, the following information is
displayed in sequence:
-
Trip hour meter.
-
Total hour meter.
-
Rear power take-off speed
-
Digital clock
ZEROING THE TRIP HOUR METER
Select the ''trip hour meter'' mode.
Hold down button
(1)
for
4
seconds.
SETTING THE DIGITAL CLOCK
-
Select the digital clock display.
-
Hold down button
(1)
for
2
seconds (the hour display blinks).
-
Set the hours by short taps on button
(1)
.
-
Validate the hours by holding button
(1)
down for
2
seconds
(the minutes start to blink).
-
Set the minutes by short taps on button
(1)
.
-
Validate the minute setting by holding button
(1)
down for
2
seconds.
761bsn04
601bsn03
601bsn04
601bsn05
DEA
D
E