CELTIS – 10.2007 –
GB
B.13
HEATING - VENTILATION - COOLING
SYSTEM
CONTROL
1-
Adjusting forced ventilation.
2-
Turning on the air conditioning.
3-
Cab isolation (recycled air).
4-
Adjusting the air temperature.
ADJUSTING FORCED VENTILATION
Move control
(1)
from
0
to
3
. Position
"3"
gives maximum fan
speed and air flow.
ADJUSTING THE AIR TEMPERATURE
Move control
(4)
:
-
To the right (red): Maximum possible temperature.
-
To the left (blue): Minimum possible temperature.
CAB ISOLATION
Air recirculation enables you to be isolated from the outside air.
To select Recirculation mode, press button "REC"
(3)
; the button
light will illuminate.
AIR CONDITIONING
The air conditioning reduces:
-
Cab internal temperature, especially in hot weather, in traffic,
or when the vehicle has been parked in the sun.
-
The humidity of the air drawn into the cab (eliminates
condensation).
The use of the air conditioning increases fuel consumption (turn
off when not required).
To turn on air conditioning, press the "AC" button
(2)
; the
operating light in the button illuminates.
841bsn18
The cab air filter is only a dust filter. It provides
no protection against gas or droplets released
by treatment products.
Isolation of the cab (recirculation) offers no protection
against gas or droplets released by treatment products.
Do not open the system; refrigerant fluid is
hazardous to the eyes and skin.
3
2
1
4
To Next Page
Loading...
Need help?
General