00 0290 380 0 - ERG RHB LEXION 600-510 - 01/09 11
3 Straw discharge
3.1 Chaff spreader
82706
Heading
A Overview of radial spreader
LEXION 600 - 560 (type 589 - 584).
B B1 = Removing / installing the left radial
spreader motor (241).
B2 = Removing / installing the right radial
spreader motor (242).
C Removing / disassembling / disassembled /
assembling / installing the chaff plate
adjustment hydraulic cylinder (3005).
Pos. M
A
(Nm)
Auxiliary utilities Remarks
1, 2 Adjust deflector plates (1) to dimension (X) from the
roof panel (2).
Move the deflector plates (1) back and forth in front
of one another. Check the clearance (Y) over the
entire length here. The deflector plates (1) must not
touch one another!
3, 4, 5 Install the rubber paddle (3) so with clamping
sleeves that the thicker top layer (4) faces the
direction of rotation (observe the fabric insert)!
Install panhead screws (5) with new self-locking
nuts and the with the head in the direction of
rotation.
6 123 Nm
M
A
= Tightening torque
Pos. Designation Dimensions Remarks
X Adjustment dimension 10 mm
Y Checking dimension 6 mm
To Next Page
Loading...
Need help?
General
