Claas RU 450 - Page 22

1.4 / 4 RU 450 - 297 925.0
General information
Torque settings for hydraulic threading seal ring according to ISO 6149
Size Torque setting according to ISO 6149
M 8 x 1 7+2 Nm
M 10 x 1 11+4 Nm
M 12 x 1.5 16+5 Nm
M 14 x 1.5 23+8 Nm
M 16 x 1.5 29+10 Nm
M 18 x 1.5 38+13 Nm
M 20 x 1.5 46+15 Nm
M 22 x 1.5 67+22 Nm
M 24 x 1.5 86+29 Nm
M 26 x 1.5 103+34 Nm
M 27 x 2 103+34 Nm
M 30 x 2 170+57 Nm
M 33 x 2 200+67 Nm
M 36 x 2 245+82 Nm
M 38 x 2 245+82 Nm
M 39 x 2 310+103 Nm
M 42 x 2 380+127 Nm
M 45 x 2 440+147 Nm