Clarion .39100-S6M-A000 User Manual

- 1 -
PH-2416I
Published by Service Dept.
Printed in Japan
Clarion Co., Ltd.
5-35-2, Hakusan, Bunkyouku, Tokyo, 112-8608 Japan
Service Dept.- 50 kamitoda,Toda-shi,Saitama,335-8511 Japan Tel: 048-443-1111 FAX:048-433-6996
298-5935-00
Oct.2001 P
Service Manual
Model
HONDA Automobile Genuine
AM/FM Radio CD Stereo
PH-2416I
※ Prevent damage caused by static electricity when re-
pairing the pick-up.
The pattern of the pick-up is short-circuiting for preven-
tion.
Remove the soldering with a solder iron whose insula-
tion resistance is larger than 10M
Ω(DC500V) after com-
plete connection to the main PWB
For repair table shall use copper or conductive sheet
(with impedance is lower to 100M
Ω from 1MΩ)such as
a sheet.
Be sure to put on a wrist-strap for prevent electric
static's.(with impedance is to 100M
Ω from 1MΩ) The
strap works to drain away the static electricity build-up
on the human body.
And as static electricity build-up on clothes is not drained
away, be careful and not your clothes to touch the pick-
up.
Position of short soldering for pick-up protection posi-
tion is different by model.
Some units have two short soldering points.
Always short LD circuit to open the short circuit and re-
moves by soldering iron.
■COMPONENTS
PH-2416I-A
Main unit −−−−− 1
CATS CARD 287-1681-03 1
Label 290-7868-02 1
■SPECIFICATIONS
Radio setion
Receive range: FM 87.75 & 87.9 to 107.9MHz
(200kHz step)
AM 530 to 1,710Hz(10kHz step)
Intermediate frequency:
FM 10.7
±0.2MHz
AM 450
±3kHz
Quieting sensitivity: FM Less than 12dB
μ
(at 30dB S/N)
AM Less than 35dB
μ
(at 20dB S/N)
Auto tuning stop sensitivity:
FM 24
±6dBμ
AM 35±6dBμ
CD section
System: Compact disc audio system
Usable Discs: Compact disc
Signal to Noise Ratio: More then 60dB
Separation: More then 55dB
General
Load impedance: 4Ω
Output power: More then 30W×2
Power supply voltage: DC13.2V(10.8 to 15.6V)
Negative ground
Dimensions(mm): 187.5(W)
×60(H)×160(D)
Weight: 1.65kg
■NOTE
※ Specification and design are subject to change without
notice for further improvement.
※ We cannot supply PWB with component parts in prin-
ciple. When a circuit on PWB has failure, please repair
it by component parts base. Parts which are not men-
tioned in service manual are not supplied.
(Genuine No.39100-S6M-A000)
(ID No.4XJ0)
■ To engineers in charge of repair or
inspection of our products.
Before repair or inspection, make sure to follow
the instructions so that customers and Engineers
in charge of repair or inspection can avoid suf-
fering any risk or injury.
2005.05.25

Clarion .39100-S6M-A000 Specifications

General

Category	Car Receiver
Bluetooth	Yes
Display Type	LCD
Radio Tuner	Yes
Tuner Bands	AM/FM
Frequency Response	20Hz - 20kHz
Model	.39100-S6M-A000
USB Port	Yes
Auxiliary Input	Yes

Summary

SYSTEM SPECIFICATIONS

Radio Section Details

Details FM/AM radio reception parameters like frequency range and sensitivity.

CD Section Performance

Covers CD playback performance metrics such as signal-to-noise ratio.

General Unit Characteristics

Lists general operating and physical characteristics like power and dimensions.

IMPORTANT OPERATIONAL NOTES

Design Changes and Component Supply Policy

Explains design update policy and PWB repair guidelines.

MAJOR COMPONENTS LIST

Key Unit Components Identification

Lists primary parts like main unit, CATS card, and labels.

CRITICAL SAFETY ADVICE

Static Discharge Prevention Measures

Advises on protecting against static discharge during repair.

SERVICE AND HANDLING GUIDELINES

General Repair Procedures and Precautions

Covers part usage, wiring, safety checks, and disassembly.

COMPONENT HANDLING RULES

Chip and Flexible PWB Precautions

Addresses specific precautions for handling IC chips and flexible PWB.

OPTICAL PICKUP MAINTENANCE

Pickup Handling, Cleaning, and Specifics

Details safe practices for the laser pickup, actuator, and lens.

ADJUSTMENT PROCEDURES

Clock Accuracy Setting Process

Describes the process for setting clock accuracy using a chronometer.

INTEGRATED CIRCUIT (IC) EXPLANATIONS

Microcontroller Pin Assignments and Functions

Details the pinout and functions of the main controller IC.

EXPLODED VIEW & PARTS LIST

Escutcheon Section Component Identification

Lists components for the front panel assembly.

EXPLODED VIEW & PARTS LIST

Main Chassis Section Component Identification

Lists components for the main chassis assembly.

CD MECHANISM VISUAL GUIDE

CD Mechanism Component Layout Illustration

Illustrates the arrangement of CD mechanism parts with reference numbers.

EXPLODED VIEW & PARTS LIST

CD Mechanism Detailed Parts Listing

Detailed list of parts for the CD mechanism assembly.

ELECTRICAL PARTS LIST

Main PWB Components (Capacitors, Diodes)

Lists capacitors and diodes for the main circuit board.

ELECTRICAL PARTS LIST

Transistors and Resistors for Main PWB

Lists semiconductor and resistor components on the main board.

ELECTRICAL PARTS LIST

Component Listings for Various Boards

Lists capacitors, resistors, and switches for multiple circuit boards.

CIRCUIT BOARD SPECIFIC PARTS

Switch and CD Mechanism PCB Components

Lists components specific to the switch and CD mechanism circuit boards.

ELECTRICAL PARTS LIST

Miscellaneous Electrical Component Listings

Lists remaining capacitor and resistor parts.

SYSTEM ARCHITECTURE OVERVIEW

System Block Diagram Analysis

Illustrates the overall system architecture and signal flow.

DETAILED CIRCUIT DIAGRAMS

Main Circuit Schematic Representation

Shows the detailed schematic of the main circuit board.

PRINTED WIRING BOARD LAYOUTS

Main and Switch PWB Physical Layouts

Shows the physical layout of main and switch circuit boards.

DETAILED CIRCUIT DIAGRAMS

Switch PWB Schematic Representation

Detailed schematic for the switch circuit board.

PRINTED WIRING BOARD LAYOUTS

Mechanism Section PWB Physical Layouts

Shows physical layout for mechanism-related boards.

DETAILED CIRCUIT DIAGRAMS

CD Mechanism Schematic Representation

Detailed schematic for the CD mechanism.