•
Quick
tuning:
Press and hold the [
.....
] or [
.....
] button to
manually tune to the desired frequency.
• Step
tuning:
Press the [
.....
] or [
.....
] button to manually tune
one step at a time to the desired frequency.
Storing
a
preset
station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory.
Manual
memory
1.
Select the desired station with seek tuning,
manual tuning or preset tuning.
2.
Press the [MEMO] button. "CH" blinks
in
the
display.
3.
Turning the [PRESET] knob either clockwise
or counterclockwise to select the desired pre-
set memory.
4.
Press and hold the [MEMO] button for 1 sec-
onds or longer to store that station into pre-
set memory.
Auto
store
Auto store selects up to 6 stations and automati-
cally stores them into preset memory.
1.
Press the [BND] button and select the desired
band (FM or AM).
2.
Press and hold the [SCN] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
memory.
Recalling a
preset
station
Turning
the
[PRESET]
knob
either
clockwise or coun-
terclockwise
to
recall
the
stored
radio
frequency auto-
matically.
1.
Press the [BND] button and select the desired
band (FM1, FM2, FM3 or AM).
2.
Turning the [PRESET] knob either clockwise
or counterclockwise to recall the stored sta-
tion.
Radio Operations
Preset scan
Preset scan receives the stations stored in pre-
set memory
in
order. This function
is
useful when
searching for a desired station in memory.
1.
Press the [SeN] button.
2.
When a desired station is tuned in, press the
[SeN] button again to continue receiving that
station.
Note:
• Be careful not
to
press and hold the
[SeN]
button
for
2 seconds
or
longer, otherwise the auto store
function engages and the unit starts storing sta-
tions.
Instant
station
recall (lSR)
Instant station recall
is
a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even oper-
ates with the unit
in
other modes.
.ISR
memory
1.
Select the station that you wish
to
store
in
ISR
memory.
2.
Press and hold the [ISR] button for 1 seconds
or longer.
• Recalling a
station
with
ISR
In
any mode, press the [ISR] button to turn
on
the radio function and tune the selected radio
station.
"ISR" appears
in
the display. Press the
[ISR] button again
to
return to the previous mode.
ADB340MP/ADB341 MP
11
To Next Page
Loading...
Need help?
General
