Operations Common to Each Mode
2.
Press the [
........
]
or
[~]
button
to
select
"DEMO".
3.
Turning the
[VOLUME]
knob
clockwise
to
"ON" or counterclockwise to "OFF".
4.
Press the [TITLE] button
to
return to the pre-
vious mode.
Entering titles
Titles up to 10 characters long can be stored
in
memory and displayed for CDs only. The num-
bers of titles that can be entered for 50 titles.
1.
Press the [FNC] button
to
select the CD mode.
2.
Select and
playa
CD.
3.
Press the [DISP] button and display the title.
"[!J
NO TITL" will be displayed.
4.
Press the [TITLE] button. "TITL" appears
in
the display and the cursor position flashes.
5.
Press the [
........
]
or
[~]
button to move the
cursor.
6.
Press the [DISP] button
to
select a character.
Each time you press the
[DISP] button, the
character changes
in
the following order:
Capital letters
-+
Small letters
-+
Numbers!
Symbols
-+
Capital letters...
7.
Turning the [VOLUME] knob either clockwise
or counterclockwise to select the desired char-
acter. Pressing the
[~]
button moves the
cursor
to the
next
character;
pressing
the
[
........
] button moves the cursor to the previ-
ous character.
8.
Repeat steps 5 to 7
to
enter up
to
10 charac-
ters for the title.
9.
Press and hold the
[~/II]
button for 1 sec-
onds or longer to store the title into memory
and cancel title input mode.
Clearing titles
1.
Playa
CD that you want to clear the title for.
2.
Press the [DISP] button and display the title.
3.
Press the [TITLE] button. "TITL" appears
in
the
display
and the display switches to the
title input display.
4. Press the
[BND]
button.
5.
Press and hold
the
[~/II]
button for 1 sec-
onds
or
longer
to
clear
the title and cancel
the title input mode.
18 ADB340MP/ADB341 MP
A
UX
function
This system has an external input
jack
so you
can listen to
sounds
and
music
from external
devices when connected to this unit.
To Next Page
Loading...
Need help?
General
