Adjusting
the
bass
This adjustment can be performed when the
EO
operation is
set
to
"OFF".
1. Press the
[A-M]
button and select
"BASS".
2. Turning the
[VOLUME]
knob clockwise to
em-
phasize
the
bass,
or
turning
the
[VOLUME]
knob counterclockwise to attenuate the bass.
*The factory default setting is "0". (Adjustment
range:
-7
to +7)
3.
When
the
adjustment
is complete, press
the
[A-M]
button
several
times until
the
function
mode
is reached.
Adjusting
the
middle
This adjustment can be performed when the EO
operation is set to "OFF".
1. Press the {A-M] button and select "MID".
2. Turning the [VOLUME] knob clockwise to empha-
size the treble,
or
turning the [VOLUME]knob coun-
terclockwise
to
attenuate the treble.
*The factory default setting is "0", (Adjustment
range:
-7
to +7)
3.
When
the
adjustment
is complete, press
the
[A-M] button
several
times
until
the
function
mode
is reached.
Adjusting
the
treble
This adjustment can
be
performed when the EO
operation is set to "OFF".
1. Press the [A-M] button and select "TREB".
2. Turning the [VOLUME] knob clockwise to empha-
size
the treble, or turning the [VOLUME]knobcoun-
terclockwise to attenuate the treble.
*The factory default setting is "0". (Adjustment
range:
-7
to +7)
3.
When
the
adjustment
is complete, press
the
[A-M]
button
several
times
until
the
function
mode
is reached.
Adjusting
the
balance
1. Press the
[A-M]
button and select
"BAL".
2.
Turning the [VOLUME) knob clockwise
to
empha-
size the sound from the right speaker, or turning
the [VOLUME} knob counterclockwise to empha-
size the sound from the left speaker.
*The factory default setting
is
"0". (Adjustment
range:
L9
to R9)
3.
When
the
adjustment
is
complete,
press
the[A-M]
button several
times
until the func-
tion
mode
is reached.
Basic
Operations
Adjusting
the
fader
1.
Press the
[A-M]
button and select "FAD".
2. Turning the [VOLUME] knob clockwise to em-
phasize the sound from the front speakers,
or
turning the [VOLUME] knob counterclockwise
to emphasize the sound from the rear speak-
ers.
* The factory default setting
is
"0". (Adjustment
range:
F9
to
R9)
3.
When
the
adjustment
is
complete,
press
the[A-M]
button
several
times until
the
func-
tion
mode
is reached.
Adjusting
MAGNA
BASS
EXTEND
The
MAGNA
BASS EXTEND
does
not adjust the
low sound area like the normal sound adjustment
function, but
emphasizes
the
deep
bass
sound
area to
provide
you with a
dynamic
sound.
*The factory default setting
is
"OFF".
1. Press and hold the
[A-M]
button for 1 second
or
longer
to
turn
on
the
MAGNA
BASS
EX-
TEND
effect. "MB-EX" lights in the display.
2.
Press and hold the {A-M] button for 1 second
or
longer
to
turn
off
the
MAGNA
BASS
EX-
TEND
effect. "MB-EX" goes off in the display.
Selecting
the
EQ
menu
About
the EO function:
The
Equalizer allows correction and modification
of the frequency response for selected frequency
ranges,
thus
allowing
the
creation
of
your
own
unique sound.
1. Press the [EQ] button.
2. Turning the
[PRESET]
knob either clockwise
or
counterclockwise to select the desired EO
menu.
* EO menus cannot
be
memorized per CD and ra-
dio mode, etc.
• EQ
menus
IMPACT
: Low and high frequencies empha-
sized.
B-BOOST
: Low frequencies emphasized.
ACOUSTIC:
Medium frequencies (vocals)
em-
phasized.
FLAT
: Original sound.
3. Press the [EQ] button to return to the original
mode.
AOB340MP/AOB341
MP
9
To Next Page
Loading...
Need help?
General
