5. OPERATIONS
Basic Operation
CAUTION
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level it may cause hearing
damage. Be careful about adjusting the
volume.
While boating, please be aware of the volume
levels in residential, family areas and local
volume level ordinances.
Turning on and off the power
Selecting a mode
Adjusting the volume
Engine ON
position
Note: Be sure to read this chapter referring
chapter “4.CONTROLS”
to the
Note:
Start the engine before using this unit.
Be careful about using this unit for a long time
without running the engine. If you drain the
vessel battery too far, you may not be able to
start the engine and this can reduce the service
life of the battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
2. Press the [ ] power button to turn On or Off
the power.
1. Press the [ SRC ] button to display source
menu.
*
External equipment not connected to this unit
is not displayed.
1. Press VOL+ button to increase the volume.
2. Press VOL- button to decrease the volume.
Mute
Display OFF/ON
Press the [MUTE] button to turn the mute On and
Off.
CMS2
7
English
Owner’s Manual
This feature will allow the user to turn the display
OFF in the event the display is too bright in different
lighting conditions.
To use this feature, please follow these steps:
1. To turn the display OFF, Press and release the
Power Button and the display will turn OFF, but
the audio from the current source will continue
to play.
2. To turn the display ON, Press and release the
Power Button and the display will turn back ON.
**With the display OFF, the ability to change tracks
and adjust volume will still remain.**
To Next Page
Loading...
Need help?
General
