Clarion CMS2 Owner's Manual & Installation Manual

Radio (AM/FM) Operation
[ ] Tuning Up / [ ] Tuning
Down Buttons
Select Tuner As Playing
Source
World Tuner
1. Press the [ ] / [ ] button change intervals
step by step.
Press the [SRC] Source button to select the AM/
FM mode.
This unit is initially set to USA frequency intervals
of 10 kHz for AM and 200 kHz for FM. When using
it outside the USA, the frequency reception range
can be switched to the intervals below.
2. Press and hold the [ ] / [ ] button to seek
to the next strongest station.
Recalling a Preset Station
Presets
A total of 10 preset positions (P1~P10) exists to
store individual radio stations in memory.
Press [ ] / [ ] button to select the desired
preset station.
During listening to the radio (AM/FM), press the
[OP] Options Button to access the radio options.
Radio Mode Options:
Auto Store LO/DX
[OP] Options Button
Only stations with sufficient signal strength will
be detected and stored in the memory.
Auto Store
LO/DX
1. Press the [OP] Options button.
2. Press the [ / ] button until "Auto Store"
is displayed.
3. Press the [ ] button to start automatically
select nine strong stations and store them into
nine presets. The new stations replace any
stations already stored in the band.
1. Press the [OP] Options button.
3. Press the [ / ] button until “LO/DX” is
displayed.
4. Press the [ / ] button to select local (LO)
or distant (DX) mode.
When LOCAL seeking is ON, only those radio
stations with strong radio signal could be received.
Area Set
This option allows you to select the appropriate
frequency spacing for your area.
1. Press the [ADJ] Adjust button.
2. Press the [ / ] button until "Area U.S.A"
is displayed.
3. Press the [ / ] scroll through the Area
options:
"Area U.S.A", "Area Europe", "Area Asia",
"Area AUST (Australia)"
Note: Default is USA frequency. Once the
region is changed, all the stations in the preset
memory will be erased.
1. Select the desired station with seek tuning or
manual tuning.
2. Press and hold the [ / ] button
3. Press the [ / ] button to select a preset
number.
4. Press the [ ] button to store current
station into preset memory.
AM
FM
Frequency
spacing
Frequency
range
Frequency
spacing
Frequency
range
U.S.A
standard
Aisa
standard
Europe
standard
10KHz
9KHz
9KHz
530-1710
KHz
531-1620
KHz
531-1602
KHz
200KHz
50KHz
50KHz
87.9-107.9
MHz
87.5-108
MHz
87.5-108
MHz
Australia
standard
9KHz
531-1620
KHz
100KHz
87.5-108
MHz
Note: Press [OP] Option button to exit .
CMS2
8
English
Owner’s Manual

Clarion CMS2 Specifications

General

Tuner type	Digital
AM band range	530 - 1710 kHz
FM band range	87.9 - 107.9 MHz
Internet radio	No
Supported radio bands	AM, FM
Backlight	Yes
Product color	Black, Silver
Package depth	172.2 mm
Package width	147.5 mm
Package height	51.3 mm