8.
OPERATION
Note:
• Be sure to read this chapter referring
to
the front diagrams
of
chapter
2.
CONTROLS on page 3 (unfold).
Adjusting
the
Bass
This adjustment can
be
performed when the Z-
enhancer Plus is set to "CUSTOM".
1)
Press A button
I!ID
and select "BASS".
2)
Turning Rotary knob
IiAI
clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
*The factory default setting is "0". (Adjustment
range:
-6
to +6)
3)
When the adjustment is complete, press A
button
I!ID
several times until the function
mode is reached.
Adjusting
the Tone
Press A button
I!ID
and select the item to adjust.
Each time you press A button
I!ID,
the item
changes
in
the following order:
•
When
"B-BOOST"
is
set
"B-BOOST"
~
"BAL:'
~
"FAD"
~
Previous
mode
When "B-BOOST" is set, the bass adjustment
value can be adjusted
in
the range of
-3
to +3
by
rotating the Rotary knob
IiAI
clockwise or coun-
terclockwise.
•
When
"IMPACT"
is
set
"IMPACT"
~
"BAL:'
~
"FAD"
~
Previous
mode
When "IMPACT" is set, the treble adjustment
value can be adjusted in the range of
-3
to +3 by
rotating the Rotary knob
IiAI
clockwise or coun-
terclockwise.
•
When
"EXCITE"
is
set
"EXCITE"
~
"BAL:'
~
"FAD"
~
Previous
mode
When "EXCITE" is set, the bass and treble
adjustment value can
be
adjusted
in
the range of
-3
to +3
by
rotating the Rotary knob
IiAI
clock-
wise or counterclockwise.
•
When
"CUSTOM"
is
set
"BASS"
~
"TREB"
~
"BAL:'
~
"FAD"
~
Previous
mode
•
When
"Z+
OFF"
is
set
"BAL:'
~
"FAD"
~
Previous
mode
When the Z button [ill is pressed and hold for 1
second or longer with the tone effect set to "B-
BST", "IMPACT" or "EXCITE", the sound char-
acteristics become flat and the indication "FLAT"
is
shown
in
the display.
Setting
the
Z-enhancer
Plus
This unit comes with 4 types of sound tone
effects stored
in
memory. Select the one you
prefer.
'"
The factory default setting
is
"CUSTOM".
Each time you press Z button [ill, the tone effect
changes
in
the following order:
"B-BOOST"
~
"IMPACT"
~
"EXCITE"
~
"CUSTOM"
~
"Z+
OFF"
~
"B-BOOST"
...
• B-BOOST : bass emphasized
• IMPACT : treble emphasized
• EXCITE : bass and treble emphasized
• CUSTOM : bass and treble adjustment
• Z+ OFF : no sound effect
Basic Operations
When
unit
is
turned
on, and stop-
ping
the
engine
of
a car with
its
volume
raised
to
the
maximum
level may harm
your
hearing.
Be
careful
about
adjusting
the
volume.
Turning
ON
the Power and Adjusting
the Volume
1)
Press the POWER button
~.
"To
turn off the power, press the POWER button
[1]
for 1 second or longer.
2) Press the FUNC button
~
and select anoth-
er operation mode. Every time the FUNC but-
ton
~
is
pressed, the display changes the
operation mode as:
Radio
~
CD
~
Radio
Note:
•
If
the CO mode is selected when no disc is inserted,
the display
shows"
NO DISC
".
3)
Turning the Rotary knob
IiAI
clockwise
increases the volume; turning
it
counterclock-
wise decreases the volume.
'"
The volume level
is
from 0 (minimum) to 33 (max-
imum).
10
08325
To Next Page
Loading...
Need help?
General
